Teledyne DALSA Xtium2 CLHS PX8




Teledyne DALSA Xtium2 CLHS PX8

Xtium™2 CLHS PX8基於經過現場驗證的Teledyne DALSA Xtium系列圖像採集卡,在PCI Express™Gen 3.0平台上採用CameraLink HS標準。


這種單電纜單插槽解決方案支持多達7-CLHS通道,每個通道以10.3 Gbits / s的速度運行,以高達8.4 GBytes / s的速度採集圖像,並使用PCIe x8插槽將其傳輸到主機存儲器。


- Half-length PCI Express Gen 3.0 x8

- 符合 Camera Link HS 標準

- 傳輸可達10.3 Gbits/sec,Max Data rate: 8.4 GBytes/sec,Host transfers up to 6.8 GB/sec

- 512 MB image buffer

- Microsoft® Windows® 7, 8(32/64-bit), WOW64



Xtium™2-CLHS-PX8 規格

零件編號 OR-A8S0-PX870
版規 PCIe
影像卡介面 Camera Link HS
Host Bus Half-length PCI Express Gen 3.0 x8
相機格式 CLHS 1 to 7 lane configurations, 10.3 Gbits/sec; X-Protocol utilises 97% of available bandwidth for image transfers, Max Data rate: 8.4 GBytes/sec
1 x CX4 for image acquisition, Active Optical Cable (AOC) ready
1 x CX4 for Data-Forwarding
1 x DH60-27P for Board Trigger, Strobe and General I/Os (main bracket)
1 x 6-pin connector Multi-Board-Sync
Pixel Clock Mono8, Mono10, Mono12 and Mono16
Frame Buffer 512 MB image buffer
相機控制 Comprehensive event notification, Timing control logic for camera trigger, line scan direction and strobe signals, Camera control through GenCP/SFNC, Bit-Error detection and correction
特點 Data Forwarding across multiple boards and PC for distributed image processing, Multi-Board Synchronization: grab seamless image from multiple camera and multiple frame grabbers in a PC, AOC cables deliver long cable lengths at maximum data rate, Image Cropping, User programmable 3x3 filter, Horizontal and vertical image flip, Delivers Trigger-To-Image Reliability Framework for powerful non-intrusive diagnostics
軟體 Sapera LT SDK, Sapera Vision Software, NB: Contact Teledyne DALSA sales for Linux availability
支援 OS Windows 7 (32-bit), Windows 7 (64-bit), Windows 8 (32-bit), Windows 8 (64-bit), Windows 10 (32-bit), Windows 10 (64-bit), Linux (64-bit), WoW64